How To Choose The Best Table Saw Blade? All You Need To Know!

For you as a carpenter, perhaps you might rely heavily on saws to cut through just about any type of wood out there.

From pine to birch to cedar, you have had many years of experience doing and perfecting your craft through a variety of projects, such as wooden chairs, tables, and even cabinets.

Not only that, but also you are passionate about your craft, which makes it all the more enjoyable.

In the past, you have probably relied a lot on pole saws, even log splitters, which bring lots of power to whatever type of wood you cut, regardless of its thickness.

While you find it super useful, you have lately been considering switching to what is known as a table saw blade, as means of testing out whether it is more convenient for you to use for your projects. You do not have much information on it, so you are not sure how to start.

That said, we are here to help you out! Read on to learn more in this article on how to choose the best table saw blade for you, as well as get some suggestions from us to get started. You will soon be able to get to work, efficiently and pleasurably.

Without further ado, let’s get started!

**Below, you'll find more detailed reviews but you can also click links above to see current prices and read customer's reviews on Amazon.

More...

Things To Consider Before Purchasing A Table Saw Blade

First things first, you will need to do your research and look into just what type of table saw blade you need for your carpentry projects.

After all, not all table saw blades operate in the same fashion: some are better built for ripping through wood while others are more refined in cutting through them.

Granted, it will take some time to find the right fit, but we guarantee you that it will be worth it in the end. Here are some aspects to look into before you buy your first table saw blade:

#1. Blade Type

As previously mentioned, not all table saw blades are identical, each of which have different properties and functions depending on what you want to use them for. We list a few of them below, as well as present their usage:

1

Flat Top Grind (FTG)

With the flat top grind, the blade consists of, as suggested, flat teeth squared off to the saw plate.

They work by chopping through the wood, in a manner comparable to rock sculpting in which small pieces of wood come off of it. It can be a bit messy, but it does a good job of whittling down a sizable chunk of wood in no time.

2

Alternative Top Bevel (ATB)

On the other hand, alternative top bevel consists of sharp, angled teeth which alternate in opposite directions per tooth, as means of producing clean slices through the wood and offering thin, wood fibers.

It ranges from 40 to 50 teeth per saw blade, which is a good amount to get the job done.

3

Combination (ATBR)

Also known as “all-purpose blades,” combination saw blades comprise of around 50 teeth for being able to go through hefty amounts of wood at a time.

Considering that they are all-purpose, combination saw blades perform both cross cutting and ripping, meaning that it can finely cut the wood, as well as go through it quickly like flat top grind blades.

4

Triple-Chip Grind (TCG)

Consisting of both raker and chambered teeth, the triple-chip grind roughly cuts through the wood in FTG fashion, while also cleaning up after itself, thereby making it less of a messy project than otherwise.

The triple-chip grind is ideal for cutting through dense items, such as laminate materials, which makes it one of the more powerful saw blades to use.

#2. Purpose Of Project

Table_saw_cutting_wood_at_an_angle

Aside from considering the blade type, you will also need to look into just what you would like to use the table saw blade for, at least for the majority of the time.

For instance, do you think to get through huge chunks of wood at one time, without caring about the mess, or do you want to get refined cuts?

Here are just a few more examples of what you can do with table saw blades:

1. Ripping

As briefly discussed, the act of ripping wood means exactly what it sounds like: you will most likely be shaving off pounds of wood all at once, which can get quite messy.

In other words, it is not a smooth blade, but it works quickly. In this case, a FTG table saw blade will be your best bet.


2. Cross Cutting

For the purposes of shearing and otherwise producing finer cuts, cross cutting saw blades will be the ideal choice for you. Types such as ATB with anywhere from 40 to 100 teeth fits this purpose, and the more teeth your table saw blade has, the smoother the cut will be.


3. Sheet Goods

This is a more distinctive purpose, just because you might not necessarily be working with just wood.

In fact, you might be working with plastic laminate- otherwise, saw blades in this category are best for dense wood like plywood or hardwood. ATB and TCG saw blades, then, are good ones to consider.

#3. General vs. Specific Woodwork

crosscut-saw

Again, this comes down to whether you intend to use your table saw blade for general projects like producing furniture or lumber for buildings or more specific woodwork for fine crafts like designing a cabinet or a sculpture.

Whichever case it might be, a rule of thumb is that the combination (ATBR) saw blade is best used for the former, whereas the other blade types listed are to be used for the latter.

#4. Power, Speed & Durability

Of course, it is necessary to consider the other features that come along with the blade type and function, including how powerful it is (in Hertz or other units of measurement), how fast the revolutions are, and whether it is durable enough to withstand even the toughest wood out there.

Considering these features will come with operation and time, but keeping them in the back of your mind will prepare you for what is to come.​

Top Five Best Table Saw Blades

#1. Freud D1050X Diablo 10-Inch 50-tooth ATB Combination Saw Blade with 5/8-Inch Arbor and PermaShield Coating

Via Amazon.com

Sharp and agile, this 10-inch, 50-tooth ATB combination saw blade from Diablo is sure to slice through just about any hard block of wood out there.

Not only that, but also it contains laser cut heat expansion slots to allow the blade to expand when it gets too hot, so that it does not wear down as quickly.

It also has tri-metal shock resistant brazing to resist extreme impact, so that it can be durable for a long period of time.


Pros

  • Contains laser cut heat expansion slots to allow blade expansion.
  • Has tri-metal shock resistant brazing to resist extreme impact.
  • Made from titanium carbide for long-lasting durability.

Cons

  • Rips too hard, sending debris flying everywhere.

Opinion

​Upon purchasing Diablo’s ATB combination saw blade, I set about getting to work. I liked how it was super adaptable to heat, as well as shock resistant to resist extreme impact. Durability has been great so far.

​However, the downside was that, while it ripping through wood well, it was a bit too much, especially since it sent debris flying everywhere and dangerous.


#2. Concord Blades WCB1000T080HP 10-Inch 80 Teeth TCT General Purpose Hard & Soft Wood Saw Blade

Via Amazon.com

​Slicing wood blocks up to 3 inches thick, Concord Blade is a powerful 10-inch, 80-tooth saw blade that can be used for both hard and soft wood.

Its 5,500 rpm is incredibly fast, which is convenient for cutting through wood and getting the job done in no time.

Its thin kerf helps with a smooth finish and minimal waste as well.


Pros

  • Slices up to 3 inches thick for both hard and soft wood.
  • Is incredibly fast at 5,500 rpm.
  • Has a thin kerf for producing a smooth finish and minimal waste.

Cons

  • Some models might be warped, which is not ideal for using.

Opinion

​I got Concord Blades as a birthday present, and after using it, I thought it did a pretty good job of cutting through wood, both hard and soft. It is really fast with its rotations, and its thin kerf offered a great finish and little waste to clean up. 

​While I am aware that I had a good model, unfortunately there are some which I have heard have come defective, which is not good.


#3. Forrest WW10407125 Woodworker II 10-Inch 40 Tooth ATB .125 Kerf Saw Blade with 5/8-Inch Arbor

Via Amazon.com

​Forrest’s woodworker has a kerf saw blade which saves about one-eighth inch of wood loss for each cut, which might be of use to you.

Otherwise, it feeds easily and has less of a jump, as means of being safe for you to use.

Its blades come at 30 degrees, which can be easy to stop, should you need to do so.


Pros

  • Its kerf saw blade saves about one-eighth inch of wood loss for each cut.
  • Feeds easily and has less of a jump, for safety purposes.
  • Blades are 30 degrees for being easy to stop.

Cons

  • Some of the blade’s teeth might be chipped, which questions quality control.

Opinion

​Forrest’s woodworker kerf saw blade proved to be a decent table saw blade to use, especially being quite safe with its easily-fed teeth and minimal jump features.

​It is also easy to stop, should you need to. However, I found that 5 of the teeth were chipped upon opening the package, which I did not appreciate.


#4. IRWIN Tools Classic Series Steel Table / Miter Circular Saw Blade, 10-Inch 180T (11870)

Via Amazon.com

Precise, smooth, and long-lasting, Irwin’s circular saw blade has a full, 180-degree tooth count for an all-encompassing cutting experience.

Aside from that, it is made from a heavy-gauge, high-carbon steel material that is guaranteed to ensure a durable and reliable saw blade.

It can slice up to five-eighths of an inch of wood, which is quite impressive.


Pros

  • Has a complete, 180-degree tooth count.
  • Made from high-carbon steel for durability.
  • Slices up to five-eighths of an inch of wood.

Cons

  • Tends to drift when operating, which questions safety.

Opinion

​Indeed, Irwin’s circular saw blade offers great precision and a smooth cut: I can attest to that, after having used it. I also quite like its high-carbon steel material, since it has not shown signs of wearing down just yet.

​My only gripe is that the blade tends to drift when in operation, so I have to be careful to hold it down really well.


#5. DEWALT DW3106P5D60I Series 20 10-Inch 60T Fine Finish Saw Blade, 2-Pack

Via Amazon.com

Dewalt’s saw blade offers a quick and smooth process for getting your wood cut done in no time, along with excellent results.

Besides that, it has a computer balanced plate for reducing vibrations when slicing through even the toughest of woods.

Finally, it has a wedge shoulder to put more pressure and power on each slice, so that you get more work done sooner than later.


Pros

  • Has a computer balanced plate for reduced vibrations.
  • Has a wedge shoulder for faster, powerful cuts.
  • Is smooth and efficient.

Cons

  • Rips through the wood a bit too roughly, which can cause debris to fly all over.

Opinion

Dewalt’s saw blade was excellent with its computer balanced plate, since it reduced vibrations and made it smoother when operating it.

​The wedge shoulder offered extra power, which I liked. The problem was that it was a bit too much, sending debris flying everywhere whenever I used it.


Winner Of The Roundup

Via Amazon.com

Altogether, Concord Blades WCB1000T080HP 10-Inch 80 Teeth TCT General Purpose Hard & Soft Wood Saw Blade (#2) is the winner of this roundup.

It works great on hard and soft wood, and it comes with a fast rotation speed to get work done in no time, with little effort. With a lovely finish and minimal waste, Concord Blades is worth an investment, should you decide on it.

Did this help you make your decision? Please feel free to comment below and share these tips with someone you know!

Happy woodworking!

Shary Saunders
 

Shary Saunders is the founder and chief editor of sharycherry.com. Gardening and landscaping have been her passion for years. You can find Shary on Twitter at @SharySaunders. Read more about Shary here.

Click Here to Leave a Comment Below 0 comments